If your Xiaomi 14 Pro Titanium (Satellite Edition) is bootlooping, showing “Invalid IMEI”, or has no network, you can recover it by flashing the official Fastboot ROM and restoring the original IMEI using Qualcomm tools.
📱 What Is Stock Firmware?
Stock firmware (Fastboot ROM) is Xiaomi’s official software package for restoring the system. Flashing it helps:
- Fix bootloop, soft-brick, or system crashes
- Remove root, Magisk, or custom ROMs
- Repair corrupted or missing system files
- Restore IMEI and fix mobile network issues
- Improve performance and system integrity
🚨 When to Flash Your Xiaomi 14 Pro (Satellite Edition)
Flash your device if:
- It’s stuck on the boot logo or loops endlessly
- You see “Invalid IMEI”, or no SIM/no service
- HyperOS is corrupted or behaves erratically
- You want to unroot, remove Magisk, or return to stock
- You need to downgrade firmware safely
✅ What You Need
- ✅ Official Xiaomi 14 Pro Ti Satellite Fastboot ROM (
.tgzformat) - ✅ Xiaomi Mi Flash Tool (latest version)
- ✅ Qualcomm USB drivers
- ✅ Windows PC + USB-C cable
- ✅ Unlocked bootloader
- ✅ Backup of personal data and QCN/IMEI
🔧 Flashing Xiaomi 14 Pro – Step-by-Step
Step 1: Download the Official ROM
- Get the Fastboot ROM from Xiaomi’s official source or trusted MI community sites
- Make sure it’s for the Xiaomi 14 Pro Ti Satellite Edition (China variant)
- Extract
.tgz→ Folder must contain animagesdirectory andflash_all.bat
Step 2: Install Drivers & Tools
- Install Qualcomm USB Drivers
- Install Mi Flash Tool (latest stable version)
Step 3: Enter Fastboot Mode
- Power off your phone
- Hold Volume Down + Power until the Fastboot screen appears
- Connect the phone to PC via USB
Step 4: Flash the ROM
- Open Mi Flash Tool
- Click “Select” and choose the extracted ROM folder
- At the bottom, choose “clean all”
- Click “Flash”
- Wait 5–10 minutes → phone reboots after success
📶 Restore IMEI (Snapdragon – QCN Method)
The Xiaomi 14 Pro Ti uses Snapdragon 8 Gen 3, so you must use QPST/QFIL to restore the original IMEI.
⚠️ Only restore your own IMEI (printed on the SIM tray or box). Modifying IMEI is illegal in most countries.
Tools Needed:
- ✅ QPST Tool
- ✅ QCN backup file (from your phone)
- ✅ DIAG Mode access
🛠 Step-by-Step: IMEI Repair via QCN (QPST)
- Enable DIAG Mode
- Enable Developer Options → turn on USB Debugging
- Connect phone to PC
- Run the following command on PC: bashCopyEdit
adb shell setprop sys.usb.config diag,adb
- Verify in QPST
- Launch QPST Configuration
- Your device should appear with a COM port (in “Ports” tab)
- Load QCN in Software Download
- Open Software Download from QPST tools
- Go to Restore tab → select your QCN file
- Click Start to write the IMEI
- Reboot & Confirm
- Reboot your phone
- Dial
*#06#to verify IMEI is restored
🔄 Common Errors & Fixes
| Problem | Fix |
|---|---|
| Phone not detected | Reinstall Qualcomm drivers / change USB port |
| Flash fails | Use correct Fastboot ROM / check firmware path |
| QPST doesn’t see device | Re-enable DIAG mode or try different QPST version |
| IMEI not restored | Use valid QCN file / try Modem log from EDL backup |
| Bootloop after flash | Boot into Recovery → Wipe Data/Factory Reset |
🔐 Flashing Tips
- Use only Fastboot ROM (.tgz) — Recovery ZIPs won’t work with Mi Flash
- Confirm device code: Xiaomi 14 Pro Ti Satellite = China-only variant
- Don’t relock the bootloader unless you’re flashing official stock firmware
- Charge battery to at least 50%
- Backup QCN before flashing if your IMEI is valid
